Moyer's Station Enterprises
You've Tried The Rest,

Now Try The Best!


     Due to a medical condition, I (and MSE) will have to curtail MSE operations temporarily.  Recovery time is to be approximately 6 to 8 weeks.
     All current orders will be processed. I will be available to offer assistance to any issues that you may encounter. I will also be able to take orders to be processed later.  I will advise when operations resume.  Sorry for any inconvenience. Your patience and understanding is greatly appreciated.

-Bill Gundrum

Call Us at (570) 754-7209

Call Us at (570) 754-7209

Shift Housings




MSE products are manufactured to give you years of trouble-free service.  Our products used are internationally and are competition proven since 1995, providing the trouble-free positive shifting you will need to be a winner.  How many times have you lost the race because of a missed shift?


The MSE Type 1 Shift Housing is designed to give you years of trouble-free service.  Each rod is supported by two replaceable Oilite™ bushings which are sealed to avoid leakage and can be dust sealed for off-road use.  This MSE Shift Housing is engineered to be installed without any transaxle or disassembly or modification.  It is a BOLT-ON housing that fits all transaxles which use the VW type shift housing, including T-2 to T-1 conversions.

The Type 2 transmission is notorious for shift problems.  There have been attempts to cure the problem by making a gear carrier to adapt the Type 2 transmission to use the Type 1 (Beetle) shift housing (Nose Cone).  But, if after the expense of this modification, you still have a shifting problem with the Type 2 (Hockey Stick) and its selecting troubles, see the “Shifting Troubles” page.  This problem has been “cured” many times by using our MSE Type 1 Shift Housing on these adapter gear carriers.

We can take care of the Type 2 shifting without all that expense and/or transmission modifications.  Simply install our MSE TYPE 2 SHIFT HOUSING!!!  It bolts on with no transmission disassembly.  Used with our shifter, you have a winning, trouble-free combination shifter for a lot less expense. 

MSE has solved your shifting problems.

The MSE Type 2 shift housing is designed to eliminate all of the troublesome linkage normally used in shifting.  The rods are supported by two replaceable Oilite™ bushings and are sealed for normal or off-road use.  The MSE Shift Housing requires some modification to the VW Selector Shafts but, there is no transaxle disassembly required.

On Type 2 housing, we have modified the method of connecting the MSE connecting rod the the VW selector shaft.  In addition we have cast new shift housings to allow more ease of installation and reliability.